Greases & sprays

Bearing and sprocket grease spray Molyslide 500ml

– spray for lubrication of slow to medium-speed rotating bearings, gears, cables and sliding surfaces, construction and agricultural machinery.

DESCRIPTION
Synthetic adhesive lubricant with high additives of resistance to high temperatures and excellent water resistance.
Special additives prevent corrosion. The whole combination results in a very stable, long-lasting lubricating film that does not drip.

PROPERTIES
– very good adhesion
– very good aging resistance
– high pressure absorption
– good protection against wear
– good penetration
– good temperature properties
– compatible with mineral oils
– working temperature -25/+220 °C

Brake cleaner Wurth 500ml

– for cleaning brake parts of cars and trucks
Features: clean disc and drum brakes,
clutch parts from friction residues, oil, grease and impurities

country of origin: Switzerland

Carburetor cleaning spray 400ml FORESTAL

– for inner and outer cleaning of carburetors
– for de-greasing
– cleans grease and dirt
Made in Italy

Chain grease spray Molyslide 500ml

– spray for lubrication and corrosion protection of all types of chains.
Molyslide Ketten-Spray penetrates directly into the gaps between the chain links and provides excellent corrosion protection.

DESCRIPTION
Synthetic lubricant with particularly strong additives, with extremely good water resistance and good wear protection.
Special additives form an extremely stable lubricating film on the metal surface that reduces friction and improves hydrodynamics.

PROPERTIES
– very good adhesion
– excellent water resistance
– good protection against wear
– good temperature properties
– working temperature -25/+200 °C

country of origin: Austria

DINOL antifreeze 100 G11 blue 1L

– Coolant
– Provides exceptional protection against corrosion with a replacement interval of 3 years.
– It is used diluted with distilled water

Gearhead grease STIHL 80g

80 g
for brushcutter gearheads

Lubrication oil HHS 2000 500ml Wurth

Areas of application:
Suitable for universal lubrication and in high pressure conditions, e.g. clutch lever, throttle and gearbox,
Bowden cables (braided wires in bushings) of larger dimensions, couplings, turning levers, etc.
Also suitable for lubrication of components exposed to high pressure stress.
Characteristics:
Medium viscosity, partially synthetic oil resistant to high pressure.
Excellent capillary penetration properties. Provides long-term protection against corrosion.
Extremely solid lubricating film with exceptional noise and vibration dampening properties.
Good material compatibility with both O and X rings.
Resistant to splashing and salt water, as well as slightly acidic and alkaline solutions.
Compared to lacquered surfaces, it behaves neutrally.
The lubricant does not fall off the spinning and rotating parts
It does not contain silicones, resins or acids
Color: yellowish
Operating temperature: -25°C to + 180°C

Mechanics soap paste hand cleaner Wurth 1kg

White concentrated paste for washing hands with water-soluble synthetic microparticles, contains glycerin, with a pleasant lavender scent.

Ideal for hard to wash stains
• Professional hand washing paste
• Contains a high concentration of soap
• Abrasive action
• Addition of glycerin and lavender fragrance

instruction manual
• Apply to dry hands and rub, rinse and dry hands.

Multifunctional lubricating oil WURTH 400ml

with a practical Cobra sprayer
5 in 1
Field of application:
Rust remover
Excellent penetration ability enables strong and fast action on rust and corrosion

Lubricant
Very good lubrication properties eliminate squeaks and squeals. Reduces wear and tear

Cleaner
By separating dirt, grease residues and old oil, it enables surface cleaning

Corrosion protection
The best adhesion properties to metals. A thin viscous protective film prevents even the slightest effect of moisture, thereby protecting against rust and corrosion.

Contact spray
The ability to repel water and moisture improves properties such as conductivity and eliminates short circuits

Rubber and plastic cleaning spray 600ml

Cockpit spray
For vehicle interiors, protects and renews plastic and rubber surfaces.

• Restores glow and elasticity on faded plastic, natural and artificial, dirty and rough leather
• Effective when used on seatbelt mechanisms to prevent squealing
• Prevents aging and sticking of rubber seals of doors and trunk
• Pleasant scent and is antistatic to prevent dust
• Contains silicone

Sealing compound LOCTITE 5910 Quick gasket 100ml

LOCTITE® SI 5910 is a low strength silicone based flange sealant
which is manufactured for use on flexible flanges with machined or cast surfaces
(metal or plastic). It is characterized by good oil resistance.
Typical application on sheet metal covers (valve covers and
oil pans) where high resistance to engine oil is required and
good elasticity of the joint.

Operating temperature -60C° to +200C°
Resistant to: water, grease, oil and glycol.
Replacement for cork and paper gaskets on flanges and tin covers.
Ideal where there is vibration and bending of parts.
It can be used on plastic and painted parts.

Sealing compound silicone black WURTH 200ml

High-quality black paste for gluing and sealing, for use in industry and on cars.
Properties:
The highest level of resistance to engine oils, gearbox oils and coolants.
There are no negative effects on electronic components or lambda sensors.
High degree of temperature resistance from -60C° to +260C°
Easy dosing, without additional aids
Field of application:
Water/oil pumps, differential covers, camshaft covers, oil sump housings...

Silicone oil 400ml Wurth

Field of application:
As a lubricant for plastic injection molds, maintenance of all moving parts,
especially plastic parts in vehicle construction, and in the food, pharmaceutical, graphic and paper industries
Characteristics:
Highly concentrated, transparent silicone oil that reduces wear, eliminates noise caused by whining,
prevents moisture accumulation and protects rubber parts from freezing.
It contains high-quality silicone oils in a high concentration
Optimum lubrication and friction protection properties
Prevents jamming (cracking)
Eliminates unpleasant squeaking sounds
Prevents wear and tear
Exceptional temperature resistance from -50°C to +250°C
Wide area of application, such as working at high temperatures and for separating castings from molds
Colorless, without color change
It can be used on light surfaces
There is no change in color in case of occasional contact with the product
Good compatibility with other materials
It repels water, eg protects rubber parts from freezing

It can be used in the field of food production and storage

WD-40 universal spray 240ml

WD40 universal spray :
-removes moisture
-protects from corosion
-lubricates almost every type of material and object
-stops squeaking
-removes dirt and grease
-removes stickers and adhesives

OpširnijeRead more

Add to cart